Battery type and category
Portable battery (e.g. portable, industrial, electric vehicle, LMT or SLI battery).
Product information · EU compliance
Technical, conformity, safety and end-of-life information for this rechargeable nickel-metal hydride battery.
Sections 1–7
Portable battery (e.g. portable, industrial, electric vehicle, LMT or SLI battery).
Ni-MH (Nickel-Metal Hydride)
According to customer requirements, it is generally printed on the cover film.
Electrical specifications of the battery:
1/3AAA100mAh · 1.2V · 3.5±0.3g
Including lithium, nickel, cobalt, lead, etc.
Iron, polypropylene, cobalt oxide, nickel, nickel hydroxide, hydrogen storage alloy powder, polyvinyl chloride, dihydrogen oxide, potassium hydroxide, sodium hydroxide, lithium hydroxide.
Nickel, nickel hydroxide, cobalt oxide, potassium hydroxide, sodium hydroxide and lithium hydroxide (in accordance with Article 18 of (EC) No 1272/2008).
Section 8
Materials present in the battery when the concentration is more than 0.1% by weight.
Section 9
Water
Section 10
We, HENAN TROILY NEW ENERGY TECHNOLOGY CO., LTD, declare under our sole responsibility that the above referenced product is in conformity with the applicable requirements of the following Regulations: EU Battery Regulation: (EU) 2023/1542.
Conformity with these directives has been assessed for the product by demonstrating compliance with the following technical specifications, standards and/or regulations:
Section 11
In accordance with the EU Battery Directive and Waste Framework Directive, battery suppliers shall provide the following information to users and distributors.
Use only manufacturer-matched chargers; avoid extreme temperature and humid storage.
Remove batteries from long-idle equipment to prevent over-discharge and swelling.
Hand over expired batteries to designated recycling points for metal recovery; intact cells can be reused for low-power storage.
Do not discard spent Ni-MH batteries with domestic garbage or litter them. Classified recycling recovers nickel, rare earth metals and steel to meet EU environmental standards.
Waste batteries can be returned to retail collection bins, municipal recycling stations and official battery recovery sites.
Collected batteries will be sorted, neutralized and recycled. Functional cells get secondary use; scrapped batteries undergo metallurgical raw material extraction.
Keep waste batteries away from metal items to avoid short circuit.
Seal leaking, deformed or overheated batteries with gloves in plastic bags.
Never incinerate batteries to prevent explosion and toxic gas release. Keep batteries out of children's reach; seek emergency treatment if swallowed.
Ni-MH batteries contain nickel, rare earth and alkaline electrolyte. Random disposal causes soil and water heavy metal pollution.
Swallowing batteries leads to internal burns; leaking liquid may cause chemical injury. Standard recycling reduces pollution and recycles reusable resources.
This document complies with EU waste laws to guide standardized battery use and disposal.
Section 12